This machine is a high-precision and durable testing device specifically designed for smart locks (fingerprint locks, password locks, card locks, etc.). It features a single-station design and integra ...
This machine is a high-precision and durable testing device specifically designed for smart locks (fingerprint locks, password locks, card locks, etc.). It features a single-station design and integrates multiple automated functions to simulate the door opening and closing actions, biometric operations, and environmental stresses in real usage scenarios, accurately assessing the lifespan and reliability of smart locks. It is a device for testing the reliability and service life of smart door locks by simulating the door opening action, and is customized for right-opening locks.
Core Technology and Functions
1. Conventional test combination actions:
1) Enter password + press handle to open door
2) Enter password + rotate key + press handle to open door
3) Swipe card + press handle to open door
4) Swipe card + rotate key + press handle to open door
5) Press inside handle to open door
2. Completion time and height of each group of actions are adjustable
3. Dimensions: Approximately 1400*500mm*1200mm (length, width, height)
4. Rated voltage: AC 220V
5. Rated power: Less than 600W
6. Real-time monitoring of handle torque signal with curve graph display
7. Monitoring of operation count
8. Monitoring of handle and key rotation angles
9. Equipped with alarm setting, stops operation when exceeding the set value
Typical application scenarios
Research and development verification:
Verify the recognition rate of the new fingerprint lock in high-temperature and high-humidity environments (such as continuous testing for 48 hours at 85°C/95% RH).
Test the wear degree of the lock body structure after 100,000 switch operations.
Production quality inspection:
Batch testing of the anti-impact force of the lock tongue (≥1200N) and the pressing life of the password keyboard (≥500,000 times).
Verification of IP water and dust resistance rating before leaving the factory (such as IP65+ for outdoor smart locks).
Certification Testing:
Generate standardized test reports that comply with international certifications such as CE, UL, and FCC.
Quality Control:
Before mass production, test core indicators such as the fatigue of the lock tongue and the durability of the fingerprint module (100,000 press tests).
Applicable customer groups:
Smart lock manufacturers (such as Kaiti, Desman, Luke)
Third-party testing laboratories (such as SGS, TÜV)
Security engineering integrators (requiring batch acceptance of door locks)
Technical parameters
| Item | Specifications |
|---|---|
| Test Station | Four-in-one integrated module (independent or linked operation available) |
| Life Test Cycles | 0~999,999 times (accuracy ±0.1%, power-off memory) |
| Torque Measurement Range | 0–200 N (bolt compression), 0–15 Nm (handle rotation) |
| Temperature & Humidity Range | -40℃~85℃ (optional), humidity 10%~95% RH |
| Compliance Standards | EN 14846:2008, EN 12209:2016, GA 374, GB 21556-2008 |
| Power & Air Supply | AC220V±10%, air supply 0.25~0.6MPa |
| Display & Control System | PLC + HMI (7-inch touch screen) |
| Overall Dimensions | Approx. 1400(L)*500(W)*1200(H) mm |
| Rated Voltage | AC 220V |
| Rated Power | Less than 600W |
After-sales Service
Warranty Period: One-year warranty for the entire machine, and three-year warranty for core components (sensors, motors).
Technical Support: Free remote debugging, operation training, and annual equipment calibration services.
Spares Supply: Quick replacement service for consumable parts (jigs, hydraulic seals) is provided.
Ordering Process
Requirement Communication: Provide test standards, load range, and mechanical foot size.
Solution Confirmation: The supplier provides 3D drawings and parameter lists.
Production and Delivery: 15-20 days for standard models, 30-45 days for non-standard custom models.
Acceptance and Training: Engineers will install and debug on-site and provide on-site training.
