I. Equipment Standards Designed in accordance with the European standard EN12527, it can conduct "dynamic tests", "long-distance walking tests", and "static load-bearing ...
I. Equipment Standards
Designed in accordance with the European standard EN12527, it can conduct "dynamic tests", "long-distance walking tests", and "static load-bearing tests", with computer control and the ability to print test reports.
II. Testing Items
Long-distance movement tests, dynamic tests, static load performance tests, etc. The application of load is carried out by superimposing weights in a direct pressure manner.
III. Test Mode
The computer software-controlled test mode can be customized for various walking patterns based on the different usage environments of the customer's products. For example: walk for three minutes and stop for one minute; walk for two minutes and stop for two minutes, reverse walk for two minutes and stop for two minutes, etc. It can also be tested according to European and American standards.
a.The load weight, obstacle height, test result description, etc. are input in the user interface of the computer software.
b. The test stroke value is set and displayed in real time through the user interface of the computer software.
c. The linear speed of the drum is adjusted by the frequency converter and is displayed in real time on the user interface of the computer software.
d. Parameters such as speed, the number of collisions with obstacles, the number of wheel rotations, total running time, and total running distance are recorded by the computer.
Display the actual measured situation in the software user interface.
e. After the machine is turned on and runs, it will automatically stop when the casters travel to the specified stroke value. After stopping, the tester can print out the test report.
f.When the casters are damaged, the testing machine will automatically alarm and stop.
IV. Specifications and Parameters
1.The drum circumference is 2 meters, and the operating speed is 1.5 to 6 kilometers per hour.
2.Obstacle heights: 2mm, 3mm, 5mm, 8mm
3.Obstacle angles: 45°, 90°
4. The load is increased by 25kg each time, with a load capacity of 500kg and the potential to be increased to 600kg.
5.The maximum height of the casters is 300mm.
6.The castor testing machine must be equipped with safety guards, such as protective covers, to prevent moving parts from hitting the testers.
7. The speed curve and G-force curve can be printed.
