Suction resistance tester 5 stationsEquipment Introduction: 1.The time and volume of the draw resistance test (3 seconds, 55 ml) can be adjusted, or the setting of ml/s can be adjusted. The suction re ...
Suction resistance tester 5 stations
Equipment Introduction:
1.The time and volume of the draw resistance test (3 seconds, 55 ml) can be adjusted, or the setting of ml/s can be adjusted.
The suction resistance value (0.8 - 1.2 kPa) is adjustable.
2. Upper limit test of sensitivity (4 seconds, 55 ml fixture connected to 1 ohm resistor) output voltage
2.45 - 2.65V; adjustable time capacity; adjustable upper and lower voltage limits
3. Output voltage of the lower limit sensitivity test (8 seconds, 55 ml fixture connected to 1 ohm resistor)
0v; Adjustable time capacity; adjustable upper and lower voltage limits
For Device A, each of the 5 channels can independently choose to turn off or on the test items; a single channel
The Tao also needs to be opened and closed.
When a defective device is automatically identified, a buzzer will sound an alarm; a red or green light will indicate PASS or fail.
The C test data record can be retrieved and viewed, and the yield rate needs to be displayed intuitively.
