I. Automatic Measurement: Automatically or manually capture the indentation, measure the indentation diameter, and calculate the corresponding Brinell hardness value. II. HB2 Automatic Measurement (Ge ...
I. Automatic Measurement: Automatically or manually capture the indentation, measure the indentation diameter, and calculate the corresponding Brinell hardness value.
II. HB2 Automatic Measurement (German Industrial Standard DIN1605): Automatically or manually measure the indentation diameters of standard test blocks and specimens, and automatically interpolate from a table to calculate the HB value of the specimen.
III. Hardness Value Conversion and Effective Verification: The system can convert the measured Brinell hardness value HB into other hardness values such as HV, HR, etc.
4. Data Statistics: The system automatically calculates and saves statistical values such as the average and variance of the measured hardness.
V. Over-limit Alarm: Automatically mark abnormal values. When the hardness exceeds the specified value, an automatic alarm will be triggered.
VI. Test Report: Automatically generate reports in WORD or EXCEL format, and the report template can be customized.
VII. Data Storage: Measured data, including indentation images, etc., can be stored in documents.
VIII. Other Functions: Incorporating all the functions of the microscopic image processing and measurement system, including image capture, calibration, image processing, geometric dimension measurement, document annotation, album management, and fixed-magnification printing, etc.
Technical parameters:
1. Application: Used for Brinell hardness indentation measurement.
2. Applicable test force range: 1, 5, 10, 15.625, 30, 31.25, 62.5, 100, 125, 187.5, 250, 500, 750, 1000, 1500, 3000 kgf.
3. Applicable indenter diameters: 1mm, 2.5mm, 5mm, 10mm
4. Applicable indentation measurement range: 0.24 - 6.0mm. It is recommended that the indentation diameter be within 0.4mm - 6.0mm for better application effect.
5. Four fixed magnifications can be adjusted to ensure measurement accuracy, respectively applicable to indentation size ranges: 0.5 - 1.6mm (70X), 1 - 2.0mm (55X), 2 - 4.0mm (30X), and 3 - 6.0mm (20X)
6. Indentation measurement accuracy: ±0.5%
7. Camera: 2-megapixel 1/3-inch CMOS USB camera with an aluminum alloy metal casing and a 304 stainless steel magnetic base. It features a button switch for directly starting the software and triggering measurements. Maximum resolution: 1600×1200. Power consumption: 75mW. Signal-to-noise ratio: 68db.
8. USB cable: 1 piece
9. Power Supply: Powered by computer USB port
10. Computer (optional) system requirements: Windows XP, Windows 7, Windows 8, Windows 10 32-bit or 64-bit desktop or laptop PC, occupying two USB ports, and Microsoft Office (WORD and EXCEL) 2007 or above must be installed to generate reports.
11. Software Configuration:
1）Automatically measure the indentation and calculate the Brinell hardness value in accordance with ASTM E10 standard.
2) It complies with the German industrial standard DIN1605 for automatically measuring the indentation of the test sample and the standard block, and calculating the hammer-type Brinell hardness value HB2.
