In the process of preparing metallographic specimens, the cutting of the specimen material is the first important step. This machine uses a thin grinding wheel rotating at high speed to cut the specim ...
In the process of preparing metallographic specimens, the cutting of the specimen material is the first important step. This machine uses a thin grinding wheel rotating at high speed to cut the specimen. It is suitable for cutting relatively hard metal materials. The machine is equipped with a cooling device to remove the heat generated during cutting, preventing the specimen from overheating and altering its structure.
Technical parameters:
| Parameter Name | Parameter Data |
|---|---|
| Cutting Method | Manual, Y-axis feed |
| Cutting Blade Size | Φ250×2×Φ32mm |
| Maximum Cutting Section | 30×30mm |
| Spindle Speed | 2800r/min |
| Motor Power | 1.1kW |
| Cutting Fixture | Threaded fixture |
| Input Power Supply | 380V, 50Hz, three-phase four-wire |
| Overall Dimensions | 500×470×420mm |
| Weight | 60kg |
Configuration list:
| Product Accessories | Unit | Quantity | Remarks |
|---|---|---|---|
| Cutting Blade | pcs | 1 | — |
| Wrench | pcs | 1 | — |
| Inlet Water Pipe | pc | 1 | 6-point interface |
| Outlet Water Pipe | pc | 1 | Φ32 |
| Technical Documents | — | — | 1 copy of Product Manual1 copy of Product Certificate |
