The Shore hardness tester (rubber hardness tester) is widely used in the hardness measurement of rubber and plastic. It features a simple structure, convenient operation, compact size, light weight an ...
The Shore hardness tester (rubber hardness tester) is widely used in the hardness measurement of rubber and plastic. It features a simple structure, convenient operation, compact size, light weight and intuitive reading. It can be carried around for handheld measurement or installed on the same model of load frame produced by the same manufacturer for load measurement.
Product standards and application scope:
1.The product is manufactured in accordance with the international standards ISO868 and ISO7619, and complies with the standards of GB/T531, JB6148 and JJG304.
2. The LX-C-2 is suitable for measuring the hardness of foamed plastic microcellular materials with a compression rate of 50% and a stress of 0.5 kg/cm² or more, and can also be used to test the hardness of other similar materials.
Product advantages:
1. During the detection process, there is no need to observe the values in real time according to the change of the measurement angle. Just after the measurement, the driven pointer directly locates at the measured position.
2. On the numerical scale, it is convenient to read and eliminates the error caused by the change of observation angle.
Technical parameters:
| Parameter Name | Parameter Data |
|---|---|
| Measuring Range | 0-100HC |
| Measuring Error | Within 10-90 degrees: ≤±1 degree |
| Resolution | 1 degree |
| Indenter Travel | 2.5mm |
| Indenter Tip Pressure | 0.55N-8.05N |
| Indenter Head Size | SR2.5mm |
| Product Dimensions | 115×60×25mm |
| Weight | Approx. 160g |
